Reason 1: You did not choose Zhenyi shares, a leading brand manufacturer in the industry
 

　　Reason 2: Fingerprint oil problem and usage problem
 

　　Reason 3: There is a problem with the equipment process parameter setting
 

　　If you want to reduce such gaps and errors, please contact Seismic as soon as possible! Next, Rogen will provide some suggestions for customers or prospective customers who use Seismic's AF plasma spray coating equipment and Seismic antibacterial fingerprint oil for reference!
 

　　We all know that the antibacterial fingerprint oil has agent A and agent B, and before spraying fingerprint oil, plasma will be used to clean the workpiece before coating. Then the editor Rogen will give you suggestions from the following three aspects.
 

　　1. Plasma cleaning
 

　　① Shaft reciprocating speed: 1050mm/ sec
 

　　②Z axis height: 40-50rmm
 

　　2. Antibacterial fingerprint oil (agent A)
 

　　①X-axis reciprocating speed: 1000-1200m/ sec
 

　　②Z axis height: 80-120mm
 

　　③Atomization pressure: 350-400Kpa
 

　　④Flow rate: 30S/0.5-1.0g
 

　　⑤Baking temperature: 150 degrees/30 minutes
 

　　3. Antibacterial fingerprint oil (agent B)
 

　　①X-axis reciprocating speed: 1000-1200m/ sec
 

　　②Z axis height 50-60mm
 

　　③Atomization pressure 120-140Kpa
 

　　④Flow 30S/5-6g
 

　　⑤Baking temperature 150 degrees/30 minutes
 

　　The above content is the process recommendation of antibacterial and anti-fingerprint oil given by Xiaobian Rogen. Please note that this recommendation also needs to be adjusted according to your product characteristics and application scenarios. For example, you need to apply to the AF plasma spraying of Seismic For coating equipment and antibacterial fingerprint oil, please contact us as soon as possible! We will provide you with different solutions according to your industry and products.