3-1953 rubber room temperature solidified body paint single component, non-corrosive, room temperature moisture solidified organic silicon elastomer, most are rapid solidification.
A translucent liquid with different viscosity.
Product features
When heated, it can be solidified quickly, transparent to translucent.
They can withstand moisture and other harsh conditions;
Good dielectric properties;
There are refined products that can be used in sensitive components such as relays, certain electric motors, potentiometers and optical instruments.
Application scenarios
Protective coatings for rigid and flexible circuit boards.
This rapid curing, one-component, self-adhesive coating, forming a soft transparent elastomer after curing, is an ideal material to printed circuit board applications, especially in the printed circuit board of the sensitive components and dense spacing design of the components.
The performance parameters
Method of use
Usage: this article can be applied to apply brush, spray, coating, etc., and the coating is not to flow.
Before applying the glue: before applying the coating, you must remove the water and grease from the surface of the object.
Glue: a coating thickness is usually between 0.1 and 0.2 mm.
The pecking order: after the first coating, it can be applied to the second time.
Finally the film thickness should be 0.3 ~ 0.5 mm.
After the operation is completed, the adhesive should be tightened and sealed immediately.Professional adhesive technology solution please click for consultation
Dow corning 3-1953 anti-paint purchase links:
